 |
 |
Insulated Concrete Forms Plumbing |
 |
Insulated Concrete Forms Plumbing in Cape Coral | ||
Plumbing and electrical components are quite easily cut into the interior foam face once the concrete has been poured. Large pipes can be fit into the ICF forms prior to pouring the concrete. The Plumbing Process Once crews complete the wall, electricians then cut the channels for wires and cables into the forms. Plumbers work with a similar method, placing cold and hot water lines into the insulation after the concrete is poured. The insulation provided by the forms gives builders the ability to successfully place concrete even during weather extremes. The form insulates the concrete and allows it to cure in isolation. All risks are diminished. The forms then provide an insulation and sound barrier. ICFs have a unique advantage - they can be cut into any shape to allow for unique designs or site conditions. They provide a continuous and flat surface to work on. The ends of the ties themselves are typically designed to accept fasteners to permit interior drywall to be installed directly over the forms. This permits mechanical attachment of exterior finishes like lath for stucco, or masonry veneer. Changes in the wiring or plumbing are easy. All you have to do is cut into the polystyrene foam. The wires or tubing will easily fit into the cuts and will be held firmly in place by the foam itself. | ||
|
|
